The Dual T1/E1 Framers form is used to program the two configurable ports on each Dual T1/E1 Framer. Program the unit to which each module connects, and select the interface type for each port.
Use this form when performing the following tasks:
This form does not apply to the CX, CXi, CX II, and CXi II controllers.
|
Dual T1/E1 Framers |
| |
|---|---|---|
|
Parameter |
Description |
Default Value |
|
Controller Module |
System-generated, protected field. Indicates the module's position in the controller. |
|
|
Unit |
Enter a unit number from interfaces 2 - 16. Two ports can be configured on each dual framer. |
Blank |
|
Comment |
Enter a name (up to 30 characters) to describe the framer port. |
Blank |
|
Dual T1/E1 Framer Port Configuration |
| |
|
Port |
System-generated, protected field. Displays the port number for each module. |
|
|
Interface Type |
Select an interface type from the drop-down list:
|
Blank |