FAX LOG ENABLE

Qualifiers:

None.

Purpose:

Enables logging of FAX Relay (T.38) calls.

• Note: This command only enables logging of only FAX Relay (T.38) calls. G.711 pass-thru faxes do not generate FAX logs.

Details:

The following data is provided in a FAX call log:

• T.38: Identifies the call as a FAX Relay (T.38) call.

• No.: Number assigned to the FAX call by the 3300 ICP. The FAX call number is a count of the number of T.38 calls that have occurred since the 3300 ICP was booted up or reset. You can use this number to track the last FAX call that was made. If you are having FAX call issues, note that last number, attempt a FAX call, and check the result. If the number has increased by one, then you know that the FAX call log is for the FAX call attempt. Note the time of the FAX call and use the time to find the associated SMDR record.

• Note: After a reboot, the system resets the No. to 1.

• Pages: Number of pages sent or received.

• Speed: Modulation and speed of the FAX call.

• Duration: Length of time in minutes and seconds that it took for the FAX call to complete.

• Result: Indicates success or failure of the FAX call and provides a result code to assist technical support with debugging.

Example:

Entry: Fax Log Enable

Example FAX call log:

• Disable Fax Logging

• FAX Over IP Support - Description