None.
Note: This maintenance command is not applicable to MCD for Industry Standard Servers (ISS).
Provides general Layer 2 (L2) switch information. For more detailed information, use the L2 Stat Port command.
|
Field Name |
Description |
|
|
L2 Switch uptime |
The time (in hundredths of a second) since the controller was last re-initialized. |
|
|
Number of Ports |
The number of L2 ports in the controller. |
|
|
L2 Switch MAC Address |
The MAC address of the Layer 2 switch in the controller. |
|
|
Ethernet Chip Information |
Ethernet Chip Count |
The number of BCM Ethernet chips in the controller. |
|
BIST Status |
The status of the Ethernet chip Built-in Self-Test (BIST). The status is a bit-based value: 0x00 - No failure 0x01 - Buffer control RAM (only in BCM5380M) 0x02 - Internal packet data buffer memory 0x04 - MIB RAM (only in BCM5380M) 0x08 - Gigabit MIB RAM (only in BCM5380M) | |
|
Rev. ID |
Ethernet chip revision ID. | |
|
Type |
Ethernet chip type: BCM5380M (1) BCM5325E (2) Other (3) | |
System Response:
LAYER 2 SWITCH:
+-------------------------------+------------------+
| Uptime (sec) | 47280 |
| Number of Ports | 11 |
| Switch Manager... | |
| IP Address | 10.37.188.10 |
| MAC Address | 08000f1b3ef8 |
| Chip Count | 1 |
|-------------------------------+------------------|
| Ethernet Chip Information: | |
| BIST Status | 00 |
| Revision ID | A2 |
| Type | |
+-------------------------------+------------------+