<language> SETS DEFAULT FROM *.LANGSEL
<language> SETS AUX1 FROM *.LANGSEL
<language> SETS AUX2 FROM *.LANGSEL
Notes:
After you issue the Language Select command, you must reset the system.
You must set DEFAULT, AUX1, and AUX2 to different languages. If you set any of these language components (DEFAULT, AUX1, or AUX2) to the same language, then the set displays may exhibit unpredictable behavior. For example, prompts may be missing from the Superkey menu.
Changes the current language of the sets on the system to a specified language. The change is applied after a system reset.
Notes:
Database Restore operations will preserve the set language active on individual sets at the time of a Database Backup. Preservation applies only to databases originating from and restored to Release 9.0 or later systems.
This command is not applicable to Symbol wireless phones as they only support English.
If the *.LANGSEL catalog is not found when the LANGUAGE ADD or LANGUAGE SELECT command is entered, the following error message will be displayed: Catalog does not exist or is not mounted.
If the *.LANGSEL catalog does not contain the specified <language>, the following error message will be displayed: The command text as entered is incomplete, ambiguous or incorrect.
While the LANGUAGE SELECT command is executing (which may take from five to ninety-five minutes), no other command will be recognized.
When the LANGUAGE SELECT command is entered with a SETS qualifier, calls in progress on these sets will be lost.
Note: When using the LANGUAGE ADD command, changes are applied the next time the system is reset.
The following languages can be specified:
English
German
Dutch
French
Italian
LA_Spanish (Latin America)
EU_Spanish (Europe)
BR_Portuguese (Brazil)
PT_Portuguese (Europe)
Romanian
Russian (5540 IP Console, and 5212, 5215 Dual Mode, 5220 Dual Mode and 5224 IP Phones)
Swedish (5540 and 5550 IP Consoles, and 5212, 5215 Dual Mode, 5220 Dual Mode and 5224 IP Phones)
Polish (5540 IP Console, and 5212, 5215 Dual Mode, 5220 Dual Mode and 5224 IP Phones)
Simplified Chinese (5550 IP Console and 5312, 5324, 5330, 5340 IP Phones)
Local 1 and Local 2 languages are in English by default and can be modified by Mitel-authorized personnel to display languages other than those listed above. For more information, see Mitel Knowledge Base article 08-3070-00005.
Note: If you use the LANGUAGE ADD or LANGUAGE SELECT command to change the language on a phone to a language that the phone doesn't support, the phone's softkeys and display messages appear in English.
|
Language Add/Language Select Command Effects |
|
|
Component |
Effect |
|
SETS DEFAULT |
Changes the default language for Mitel display telephones and attendant consoles. The status of the auxiliary languages is not changed. |
|
SETS AUX1 |
Changes the first auxiliary set language for Mitel Networks display telephones and attendant consoles. All sets running the current first auxiliary set language are converted to the new language. |
|
SETS AUX2 |
Changes the second auxiliary set language for Mitel display telephones and attendant consoles. All sets running the current second auxiliary set language are converted to the new language. |
System Response:
Loading FRENCH language, please wait . . .
Language selection is complete.
System Response:
Loading ITALIAN language, please wait . . .
Language selection is complete.
System Response:
Loading Russian language, please wait . . .
Warning: Sets incapable of displaying Russian will display English instead.
Language selection is complete.