ALARMS
ALARMS ALL
REDUNDANT
Provides all alarm information for the specified alarm.
Refer to the available alarm categories and alarm thresholds.
REDUNDANT qualifier applies only to the CX II, CXi II, MXe and MXe Server fan, power supply, and hard drive. Use it to identify which redundant hardware component has failed.
Note: REDUNDANT qualifier is not applicable to MCD for Industry Standard Servers (ISS).
On the SUPERCONSOLE 1000, this command is found under the REPORTS group of commands.
System Response:
Current System : Alarm Major : viewed from Active |
|||||||
Category |
Total in System |
Unavailable |
Alarm Threshold Percentage |
||||
Total |
% |
Alarm |
Minor |
Major |
Critical | ||
Digital Links |
1 |
1 |
100 |
Major |
- |
>0% |
- |
System Response:
Category |
Total in System |
Unavailable |
Alarm Threshold Percentage |
||||
Total |
% |
Alarm |
Minor |
Major |
Critical | ||
SFT Zones |
1 |
0 |
0 |
|
- |
>0% |
100% |
System Response:
Power Supply |
Installed |
Seated Fault |
Input Fault |
Output Fault |
Temp. Fault |
Fan Fault |
1 |
Yes |
No |
No |
No |
No |
No |
2 |
Yes |
No |
No |
No |
No |
No |
|
|
|
|
|
|
|
Fan |
Running |
1 |
Yes |
2 |
Yes |
Temperature Sensor |
Temperature |
Alarmed |
1 |
26 |
No |
2 |
29 |
No |
|
|
|
RAID controller temperature 26. RAID Temperature Alarm Inactive. |
|||
RAID controller rebuild is idle. |
|||
Hard Disk |
Installed |
Hard Fault |
Soft Fault |
1 |
Yes |
No |
No |
2 |
Yes |
No |
No |