None
Use this command to swap the active and inactive partitions on your controller hard drive after you install new software using the Online Upgrade option from the Software Installer tool. You can also use SWAP to reboot from your original software load.
Note: This maintenance command is not applicable to MCD for Industry Standard Servers (ISS).
Note: You can only use the online upgrade method and the Swap command if the controller hard disks have been formatted or reformatted with active and inactive partitions.
You can execute the swap command manually, or you can schedule it from the System Installer tool. If there is no compatible software version on the inactive partition, the Swap will not be allowed (the Change button will be disabled).
You must reboot the controller after the swap is complete.
Tip: When installing a new version of software, you will not be able to perform a new backup until the Swap is done.