Tone Demonstration allows you to hear the tones provided on the system.
Dialing any string of digits (other than the specified two-digit identification code) results in either termination of the Tone Demonstration or return of random tones.
During Tone Demonstration, if you flash the switchhook, you will hear Transfer dial tone, and you will exit Tone Demonstration.
If you do not enter an identification code within 30 seconds, you will exit Tone Demonstration.
If you select waiting tone (23), you will hear either music (if provided) or silence.
Assign a feature access code to Tone Demonstration in the Feature Access Codes form.
See the Feature-Phone Matrix (PDF or Microsoft Excel version) for a list of phones that can use this feature.
All telephones
To use Tone Demonstration:
Lift the handset.
Dial the Tone Demonstration feature access code.
Dial the tone identification code.
Do one of the following:
To exit, hang up.
To listen to another tone, dial another tone identification code
|
Tone Identification Code |
Tone |
|
10 |
silence |
|
11 |
dial tone |
|
12 |
transfer dial tone |
|
13 |
busy tone |
|
14 |
do not disturb tone (special busy tone) |
|
15 |
standard ringback tone |
|
16 |
special ringback tone |
|
17 |
reorder tone |
|
18 |
conference tone |
|
19 |
camp-on tone |
|
20 |
override tone |
|
21 |
interrupted dial tone |
|
22 |
interrupted dial tone with message waiting tone |
|
23 |
waiting tone |
|
24 |
paging tone |
|
25 |
dial tone with message waiting tone |
|
26 |
data connect tone |
|
27 |
extended second dial tone |
|
28 |
feature active tone |
|
29 |
confirmation tone |
|
30 |
congestion tone |
|
31 |
Channel Associated Signaling (CAS) tone |
|
33 |
ringer pitch adjust tone |