The System IP Ports form is used to associate the SIP transport protocol used with the port on the local host. If a value other than the default is used, the user should validate that the port is not being used elsewhere.
Use this form when performing the following tasks:
If you change the System IP Port settings, the changes will take effect after the next system reboot.
|
Parameter |
Description |
Default Value |
|---|---|---|
|
SIP UDP Port |
Enter the local port number to be used for the UDP transport protocol on the SIP Trunk. The valid range is from 1-65535. |
5060 |
|
SIP TCP Port |
Enter the local port number to be used for the TCP transport protocol on the SIP Trunk. The valid range is from 1-65535. |
5060 |
|
SIP TLS Port |
Enter the local port number to be used for the TLS transport protocol on the SIP Trunk. The valid range is from 1-65535. |
5061 |