Analog Services Units

Purpose:

The Analog Services Units form defines the analog services units that are supported by the system.

Use this form to perform the following tasks:

Field Descriptions

Parameter

Description

Default Value

Controller Module

System-generated, protected field that identifies the controller module slot locations:

  • For embedded analog cards and onboard Copper Interface Modules (CIMs) this field displays a dash (-).

  • For Quad CIM modules, this field lists the slot number of the module.

For embedded analog cards and onboard Copper Interface Modules (CIMs) this field displays a dash (-).

For Quad CIM modules, this field lists the slot number of the module.

 

Port

System-generated, protected field that identifies the purpose of the port.

For systems with an embedded analog card, the Programmed Type for Port 0 is "3300 Embedded Analog" or "3300 Expanded Analog".

For the AX controller, the Programmed Type field for Port 1 is "AX Card Chassis".

For systems that have an external ASU that is connected through an embedded CIM or a Quad CIM, this field displays the Port ID of the CIM through which the ASU is connected. CIM ports are numbered from left to right.

  • Embedded CIM ports or Quad CIM ports can be set as "Not Supported", "3300 Universal ASU", "ASU", or "ASU II".

  • On a CX, CXi, CX II or CXi II platform, the fourth port on each Quad CIM module is not supported and, the Installed Type field for these ports always displays "Port Not Supported".

 

Unit

Enter a unit number from 2 through 16.

Blank

Programmed Type

Select the programmed unit type.

Not programmed

Installed Type

System-generated, protected field. Identifies the installed unit type.

 

Comment

Enter any applicable comments (optional). This programmable field will accept up to 14 alphanumeric characters.

Blank

Programmed Card Slot 1

For the ASU II only. Select the card type.

Not programmed

Installed Card Slot 1

For the ASU II only. System-generated, protected field. Identifies the installed card type.

 

Programmed Card Slot 2

For the ASU II only. Select the card type.

Not programmed

Installed Card Slot 2

For the ASU II only. System-generated, protected field, Identifies the installed card type.