Program Embedded Analog

Overview:

The Analog Main Board (AMB) and Analog Option Board (AOB) provide embedded analog capability for the CX, CXi, CX II, and CXi II, and MX controllers. The MXe supports only an AMB. The AMB provides Loop Start, ONS, Music On Hold, and Paging circuits. The AOB is an optional board installed on the AMB that provides additional Loop Start circuits, ONS circuits, and a Paging circuit.

• Notes:

• The AMB and AOB part numbers are associated with the specified controller.

• Analog boards do not support high voltage message waiting indicators on ONS sets.

For installation instructions, refer to the Technician's Handbook (see About the 3300 ICP Documentation Set).

Programming

To program embedded analog:

• Analog Services Units form.
  Select Unit 4 (installed type "3300 Embedded Analog") and click Change.
  Select one of the following from the Programmed Type field:

• "3300 Embedded Analog" if programming the Analog Main Board only

• "3300 Expanded Analog" if programming the Analog Main Board and Analog Option Board

• Program a Universal ASU

• Program an ASU II

• Program an ASU

• Program Analog Telephones

• Program Analog Trunks

• Program Music On Hold

• Program Loudspeaker Paging