The Multiline DNI Sets form is used to program Multiline DNI telephones. Use this form when performing the following tasks:
This form does not apply to the CX, CXi, CX II, or CXi II controller.
When deleting DNI sets, you must also delete the corresponding directory entries and voice mailboxes.
Parameter |
Description |
Default Value |
Cabinet, Shelf, Slot |
System-generated, protected field. Identifies the card position. |
|
Circuit |
System-generated, protected field. Identifies the hybrid circuit used for the associated device. |
|
First Channel |
Select the attached device type. |
Blank |
Second Channel |
Select the attached device type PKM12, PKM48, AIM, or Dual PKM. Unassigned channels must be left "No Device".
|
No Device |
Number |
Enter a unique internal directory number up to seven digits in length assigned to the line circuit. |
Blank |
Local-only DN |
Allows you to specify the directory number as a local-only directory number in a cluster. This box only appears in the form if your system has been migrated to support Remote Directory Number Synchronization. |
Not Selected |
ACD Enabled |
Select "Yes" if the telephone is to be an ACD set. This field cannot be changed from "Yes" to "No" if the telephone is part of an ACD hunt group.
|
No |
Line Type |
System-generated, protected field. Contains a default value of "not assigned". Once the line is programmed, the field shows "single line". Once a group is created, the field shows either "key system" or "multicall" as appropriate. |
|
Interconnect Number |
Enter a number, between 1 and 64, that references an entry in Interconnect Restriction. |
Blank |
Language |
System-generated, protected field. Indicates the set operating language. |
|
Tenant Number |
Enter the number of the set's tenant. |
1 (landlord) |
User PIN |
Enter a password for the user PIN. The PIN can only include digits from 0 to 9 and can be from 0 to 8 digits in length. |
Blank |
Confirm User PIN |
Re-enter the password to confirm. |
Blank |