Program Symbol NetVision MiNET Phones

Before You Begin

Ensure the following is complete:

• Program Class of Service, Interconnect Restriction, and Intercept Handling.

• Install the Symbol NetVision MiNET Phone Administrator Tool on a Windows NT or Windows 2000 PC.

Programming

To program a Symbol NetVision MiNET Phone:

1. Wireless Phone IP Sets form
   Enter the following information:

• Directory Number (DN)

• PIN Number (must be four digits)

• ACD Set

• Interconnect Number

• Tenant Number

2. Default Account Codes form (optional)
   Create a default account code number that will appear in all SMDR records for the station.

3. Station Attributes form
   Assign a Class of Service, Class of Restriction, and Intercept Number to the DN of the phone.
   (Optional) Assign a Default Account Code Index number.

4. User and Device Configuration form
   Use the User and Device Configuration search field to locate the directory number that you assigned to the device. Assign a name, department, and location to the directory number.

5. Update the NetVision MiNET Phone to use the MiNET protocol.

• Note: For easy access to the various Mitel documentation suites go to http://edocs.mitel.com, the documentation site at Mitel Online.

6. Import the MitelWM.csv file from the 3300 ICP to the NetVision MiNET Phone Administrator Tool.

7. Perform a firmware upgrade, either manually or automatically.

• Note: To automatically update the NetVision MiNET Phone's firmware, you must configure the AirBEAM parameters. AirBEAM is a feature available through the NetVision MiNET Phone Administrator Tool that allows automatic download of phone firmware and configuration data to wireless phones.

8. Create profiles for the NetVision MiNET phone.

9. Download the profiles to the NetVision MiNET Phone.

10. Note: If you delete telephones, you must also delete the corresponding directory entries and voice mailboxes.