Wireless IP Sets

Parameter

Description

Default Value

Device ID

System-generated, protected field. Identifies the IP telephone.

• Note: The form will only display the number of IP devices that have been purchased (up to a maximum of 700 IP devices). You can only program the purchased number of IP telephones.

Device Type

Select  the required device type.

Netvision IP

Directory Number

Enter a unique internal directory number up to seven digits in length assigned to the line circuit.

Blank

Local-only DN

Allows you to specify the directory number as a local-only directory number in a cluster.

Not Selected

Wireless PIN

Enter a 4 digit PIN number (used for NetVision only).

Blank

ACD Enabled

Select "Yes" if the telephone is to be an ACD set.

• Note: This field cannot be changed from "Yes" to "No" if the telephone is part of an ACD hunt group.

No

Line Type

System-generated, protected field. Contains a default value of "not assigned". Once the line is programmed, the field shows "single line". Once a group is created, the field shows either "key system" or "multicall" as appropriate.

Interconnect Number

Enter a number between 1 and 64 that references an entry in Interconnect Restriction.

Blank

Language

System-generated, protected field. Indicates the set operating language.

• Note: Only English is supported for Symbol wireless phones.

MAC Address

IP-DECT OpenPhones: You do not need to enter the MAC addresses of the OpenPhones if the OpenPhones have the latest version of firmware installed. Ensure that you download and install the latest OpenPhone firmware. Refer to the IP-DECT Technical Manual for instructions.

SpectraLink Wireless Telephones: You do not need to enter the MAC Address of the SpectraLink wireless phone.

Blank

Tenant Number

Enter the number of the set's tenant.

1 (landlord)

User PIN

Enter a password for the User PIN. The PIN can only include digits from 0 to 9 and can be from 0 to 8 digits in length.

Blank

Confirm User PIN

Re-enter the password to confirm.

Blank