Use the Station Attributes form to assign a Class of Service, Class of Restriction, Intercept Number, and Default Account Code number to each station in the system. This form uses Range programming.
The Station Attributes form refers to the following forms:
The Class of Restriction numbers defined in this form are referenced by the Class of Restriction Groups form.
A station may have a different Class of Service and/or Class of Restriction for each mode of service: Day, Night 1, and Night 2.
|
Parameter |
Description |
Default Value |
|
Number |
System-generated, protected field. Lists directory numbers. |
|
|
Intercept Number |
Enter the Intercept Number that refers to the Intercept Handling form. |
Blank |
|
Class of Service Day |
Enter a COS number for Day mode of service. |
Blank |
|
Class of Service Night1 |
Enter a COS number for Night1 mode of service. |
Blank |
|
Class of Service Night2 |
Enter a COS number for Night2 mode of service. |
Blank |
|
Class of Restriction Day |
Enter a COR number for Day mode of service. |
Blank |
|
Class of Restriction Night1 |
Enter a COR number for Night1 mode of service. |
Blank |
|
Class of Restriction Night2 |
Enter a COR number for Night2 mode of service. |
Blank |
|
Default Account Code |
Enter the code that refers to the Default Account Codes form. |
Blank |
|
Zone Assignment Method |
Select the Zone Assignment method: Default or Manual. When Default is selected, the Zone ID doesn't have to be entered because the zone of the ICP to which the set is registered is used. If you selected Manual, you must enter the Zone ID in the Zone ID field.
|
Default |
|
Zone ID |
Enter the Zone ID for the associated IP device DN. Compression is not applicable to non-IP devices. |
1 (default zone) |
|
SIP Device Capabilities |
The number of the SIP Device Capabilities form that corresponds to this station. Non-SIP devices ignore this value. |
1 |