The Digital Network Interface (DNI) Consoles form is used to program DNI consoles. Use this form when performing the following tasks:
This form does not apply to the CX, CXi, CX II, or CXi II controller.
When deleting DNI consoles, you must also delete the corresponding directory entries and voice mailboxes.
|
Parameter |
Description |
Default Value |
|
Cabinet, Shelf, Slot |
System-generated, protected field. Identifies the card position. |
|
|
Circuit |
System-generated, protected field. Identifies the hybrid circuit used for the associated device. |
|
|
Device Type |
Select either No Device or SC1000 to indicate the device type with the correlating Device ID. |
No Device |
|
Directory Number |
Enter a unique number up to seven digits in length to be assigned to the line circuit. This is the number dialed to ring the console. |
Blank |
|
Local-only DN |
Allows you to specify the directory number as a local-only directory number in a cluster. This field only appears in the form if your system has been migrated to support Remote Directory Number Synchronization. |
Not Selected |
|
Softkey Appearance |
Select the softkey appearance (2-7) from the drop-down list. |
Blank |
|
Interconnect Number |
Enter a number, between 1 and 64, that references an entry in Interconnect Restriction. |
Blank |
|
Language |
System-generated, protected field. Identifies the operating language. |
|
|
Tenant |
Enter the number of the console's tenant. |
1 (landlord) |